参考压力监测器 Fluke RPM4 BA100K

产品名称：	参考压力监测器 Fluke RPM4 BA100K
产品型号：	Fluke RPM4 BA100K
产品品牌：	美国 - 福禄克
产品特色：	· Transfer standard level measurement uncertainty, ± 0.01% of reading (± 0.008% for dual channel mode) · Single channel or dual channel with parallel measurementmode to reduce uncertainty and increase reliability · Large, easy to read display · RS232 and IEEE-488 interfaces included

Fluke RPM4 BA100K 参考压力监测器

The RPM4 BA100K is a full function laboratory quality barometer intended to measure atmospheric pressure with the very highest performance. Its outstanding pressure measurement specifications are made possible by DHI's exclusive quartz reference pressure transducer (Q-RPT) modules.

· Transfer standard level measurement uncertainty, ± 0.01% of reading (± 0.008% for dual channel mode)

· Single channel or dual channel with parallel measurementmode to reduce uncertainty and increase reliability

· Large, easy to read display

· RS232 and IEEE-488 interfaces included

· On-board functions including adjustable average time, high/low, deviation from set point, rate, freeze

· A2LA accredited calibration included at no extra cost, internationally recognized through ILAC, APLAC, EA and IAAC

· Ideal for absolute pressure AutoZeroing of pressure transfer standards and molbox flow terminals

· Compact and rugged presentation

· Optional battery pack

· 1 week delivery from factory

技术指标

	RPM4 BA100K (Single Channel)	RPM4 BA100K/BA100K (Dual Channel)
Range	70kPa～110kPa (10psia～16psia)
Power requirements	85Vac～264Vac, 50/60Hz; 12Vdc, 1.2A (battery)
Weight	5kg (11 lb)
Dimensions (H x W x D)	10cm x 22.7cm x 24cm (3.9 in. x 8.9 in. x 9.5 in.)
Test port connections	1/8in NPT F
Communications ports	RS232 (COM1, COM2), IEEE-488.2 Resolution To 1ppm, user adjustable To 1ppm, user
Resolution	To 1ppm, user adjustable
Operating temperature	15°C～35°C (59°F～95°F)
Warm up time	30 minute temperature stabilization recommended from cold power up
Vibration	Meets MIL-T-28800D
Predicted Stability ¹	± 0.005% of reading	± 0.0032% of reading
Precision ²	± 0.008% of reading	± 0.006% of reading
Measurement Uncertainty ³	± 0.01% of reading	± 0.008% of reading
1、Predicted Q-RPT measurement stability limit (k=2) over one year assuming regular use of AutoZero function. AutoZero is performed by the operator by comparison with a barometric reference in absol mode. Absolute mode predicted one year stability without AutoZ is: Single Channel ± (5Pa + 0.005% of reading), D Channel ± (4Pa + 0.0032% of reading). 2、Combined linearity, hysteresis, repeatability. 3、Maximum deviation of the Q-RPT indication from the true value of applied spressure including precision, predicted one year stability limit, temperature effect and calibration uncertainty, combined and expanded (k=2) following the ISO “Guide to the Expression of Uncertainty in Measurement.”

型号和配件

型号	描述
Fluke RPM4 mhhhac/mlllac	参考压力监测器位置：mhhhac 指示高位 Q-RPT的名称。C指示Q-RT 类别（s 对应标准，p 对应高级） mlllac指示低位 Q-RPT的名称和类别。如果没有低位Q-RPT 则留空。请参阅可用Q-RPT 的功能下方的Q-RPT 和范围表。
RPM4 04	-1 美版设备，-2 SI 版设备
RPM4 05	CE 标志
RPM4 06	特别校准
RPM4 07	专用测试液，高位 Q-RPT（特殊液体）
RPM4 08	专用测试液，低位 Q-RPT（特殊液体）
RPM4 09	-1 特殊配置，空气数据（仅限于 A160K/A160K、A350K/A160K）
配件	描述
电池组/充电器	12V 直流电电池，带充电器
机架安装套件	标准 19in 机架安装工具机架
脚踏开关	远程 [ENTER] 脚踏开关（部件号 3070940）
MPC1-3000	手动操作的气压控制器，压力量程从真空到 20 MPa (3,000 psi)
MPC1-1000	手动操作的气压控制器，压力量程真空可达到 7 MPa (1,000 psi)
GPC1-16000 / GPC1-10000	手动气压控制器
MPG1-200M 402122	手动液压发生器/控制器，200MPa（30,000psi）
MPG2-H	高压液体调节器，最高至200MPa（30,000psi）
OPG1-30000	液压压力发生器包括：癸二酸酯（合成油）、用于连接到 PG7302 或 RPM4 的外管/适配器以及操作和维护手册。
PK-7000-PPC/MPC	互联套件 - 将 PG7102 连接至 PPC 或 MPC 压力控制器和被测设备。

● Fluke COMPASS® 压力计量校准软件V4.0 英 ● Fluke 如何用COMPASS校准软件，校准基准压力传感器英 ● Fluke MET CAL® 校准管理软件英 ● Fluke P5500系列液压气动对比试验泵、介质隔离器及附件英 ● Fluke 数字压力控制器&校准器综述 ● Fluke 什么是高性能数字压力计的最重要指标 ● Fluke 压力校准应用和解决方案 2016版 ● Fluke 使用自重测试仪或活塞压力计时的重力计算英 ● Fluke 活塞式压力计综述 ● Fluke PPC4 压力控制器&校准器 ● Fluke 如何选择压力比较仪英 ● Fluke 如何评估压力测量规范英 ● Fluke 气体流量校验仪介绍 ● Fluke 控制精度为何如此重要 ● Fluke 基于Q-RPT产品的测量不确定度分析

产品分类